What is the Hongcheng Wall Tile
HONGCHENG wall tile is a light flexible wall tile,which is
self-developed by Hongcheng Enterprise.It is made out of fiberglass
mat ,the surface is coated by granules imbedded in asphalt.The
asphalt is protected from the sun's uv light by granules pressed
into the tile while it is hot (and soft). The granules are 1
millimeter-sized stones (e.g., of crushed granite), which are
coated with an inorganic silicate material. The coating contains
microscopic pigment particles, similar to those used in paint, to
Convinent to install: light in weight, easy to cut, easy to paste
and easy to install;siamesed and suitable to install by large area
at one time, so it is more efficient for installing.
More beautiful and artistic:more colors available and stabilization
of colors, variety of shapes.
Duriability;it is made out of fiberglass mat, the surface consists
of hard granules imbedded in asphalt,the granules give the tile
color and reflect the light, give the tile durable surface.
Self-cleaning: the granules interact with ultraviolet rays in
sunlight,loose dirt ,don't form obvious stain and, then with water
or rain, it can be self-cleaning.
Maintenance friendly: they can be replaced quite easily without any
demanding wall work.
Enviroment friendly:harmless, noise resistence,reflect the light,
heat and humidity resistence.
|Packing:25pcs/bundle (one bundle covers 10.5 square meter)|
|Installed efficiency:Highly efficient|
|Size deviation(mm): high-class0.5 ,acceptable:±1|
Hongcheng Wall Tile Construction Steps
Step1:To Level the original wall
Using 1:3 composite mortar, level the original wall.
Step2: To Cover the waterproofing interface treating agent
Firstly, add some water to the waterproof interface treating agent,
and then work the mixture into a paster;
Secondly, paint the wall with paint roller, the thickness of paint
is 1mm; Thirdly, dry for 10~30min.
Step3: To Coat the waterproofing adhesive mortar(Containing viny
coated polyester scrim)
Firstly,add some water to the adhesive mortar, and then work the
mixture into a paster;Secondly,coat the paster with strike-off
the coated thickness is 2mm, and to entomb the viny coated
polyester scrim into coated layer,then plane the viny coated
Thirdly, dry the surface for 30~60min.
Step 4:To Glue the strong waterproofing adhesive
Firstly, work the strong waterproofing adhesive into a
paster;Secondly,glue the adhesive, the coated thickness is 1mm;
Thirdly,dry the surface for 3~5min
Step 5:To install the HONGCHENG WALL TILE ( No demanding gap)
To coller the wall tile,then press and level the surface,and the
installation work is over.