JFX-1 Automatic Capping Machine adopts the design of vibrating cap
sorter and fetching cap supplier. By using a mechanical arm to pick
up the cap, place it under sealing head, precisely place it on top
of bottle by the sealing head, this process ensures a very smooth
and exact sealing operation. The sealing head is also equipped with
adjustable torque as needed for individual cap & bottle, in
addition to tension absorbing mechanism to extend sealing
durability. It is easy in bottle size change-over for different
bottle cap sizes The capping head takes the cap and then capping
which guarantee the qualification rate of capping. It can realize
the capping of plastic caps, aluminum caps and press-in type caps
in changing different capping device. It is easy to replace and
operate. Capping for different containers can be replaced in a
short period of time. The capping machine can be used as a single
machine or used in the filling line. It applies to the capping for
chemicals, medicine, food, cosmetics and cleaning products.
2.1 It adopts the method of fetching the caps into the capping head
first and then capping which make sure the qualified rate of
2.2 The capping head uses the design of inflatable design and
tighten the caps with air pressure to make sure no harm to the caps
during capping process.
2.3 Sensors are installed on the machine, the machine will stop
automatically when there is no bottle in the input side or jam at
the output side. Then it will start automatically when there is
bottle input and jam problem solved.
2.4 A cap sensor is installed in the machine, it will stop and
alarm when there is no cap.
2.5 A clutch structure is installed at the transmission part of the
main machine. And it will stop and alarm when there is stuck or
2.6 A cylinder is installed at the bottle output side to make sure
the stability of the machine.
2.7 A encoder is installed at the main axis transmission structure
to read the current state to make sure the stability of the
3、Main Technology Parameter
3.1 Capacity：≤50 Bottles/min
3.2 Applicable Bottle Type：100-250mm
3.3 Applicable Bottle Diamention: 40－90mm
3.4 Cap Specification：25-50mm
3.5 Air Pressure：0.5～0.7 MPA
3.6 Power Source：～220V、50HZ
3.8 External Dimension：2400×1500×2000 mm（L×W×H）