Model No.: TC32
boxes, enclosures and controls, with IP40, IP44, IP55 protection
levels.（surface mounted electrical box）
3 module Flush mounting electrical switch wall box, Idrobox,
surface mounting wall box, watertight enclosure IP45, electrical
switch box, Electrical Junction boxProduct Parameters
gray or customized
OEM & ODM
By sea / By air / By express
Western & Southern Europe, Northern Europe, Southeast Asia,
Eastern Europe, Middle East
The advantages of this box are as following:
Surface mounted box provide convenience for new switch/socket or
other function keys requirement after the decoration. There is no
requirement to make cavity on the finished wall.
Even though it is a remedial measure, nice box appearance still
could help with your room look.
Round corners is safe for kids.
Easy install -- the box is a combination of wall box, switch plate
support and switch cover plate. The controls could be locked on the
box directly. Four screws at the four corner are easy to be taken
Solid locks -- the locks structure would catch the controls firmly
We have several series of surface mounted box. They go to work with
our existing switch, socket and other controls. They are mostly
available with one module, two module, three module, four module
and six modules.
How to install a surface mounting electrical box:
Mounting on masonry walls:
A.For mounting on a masonry surface hold the box on the wall at the
position where you would want it and ensure that it is horizontal
using a spirit level. When it is horizontally level, mark the
attachment holes and remove the box. Drill where you marked the
fixing holes to attach the box.
B.Determine where the electrical wiring will enter the box and use
pliers to break out the entryway for the wire. Pass the wire
through the hole and align the mounting box up to the mounting
holes you have drilled. Use countersunk screws to fix the mounting
box to the wall. Before fully tightening the screws use the spirit
level to level the mounting box.
Mounting on sheetrock walls:
A.Attaching a surface mount electrical box on sheetrock or plaster
walls can be done in a similar way to masonry.
B.Place the mounting box on the wall and align it so that the
fixing screws go into the wooden frame or 2x4 behind the wall.
Check that it is possible to feed in the electrical wire from
behind the box.
C.Mount the box and feed the electrical wiring into the box.
1. Plastic Bag
2. Inner Box
4. Customized color box according to customers' design.
Q: What is the water proofing rating of this electrical box?
A: It is IP rating is IP40.
Q: What color is available for this model?