New and improved probe that measures your SpO2 and PR with extreme
Superior 256k color OLED screen with rotational display
Synchronous display on the oximeter and computer
Powerful 3.7V Rechargeable Lithium battery and a charger with USB
Free advanced software (SpO2 Assistant) to upload and analyze up to
24 hours of data at a time
Built in auditory and visual alarm that will warn you if your SpO2
is beyond set limits.
Plethysmograph to measure blood flow.
Takes 5 readings per sec to ensure that any lowering of SpO2 level
is being recorded.
Charges when connected to a computer or to the power supply via the
provided power adaptor.
CAN ONLY BE DOWNLOADED TO PC. WILL NOT WORK ON SMARTPHONES. IF YOU
BUY THE BLUETOOTH VERSION, YOUR LAPTOP/PC MUST BE CAPABLE OF
Part Number: CMS50FPLUS
UPC CODE: 091131218020
INSTRUCTIONS TO DOWNLOAD DATA TO PC
If you are viewing this information using a mobile device, please
scroll to the side for more information
|NON-BLUETOOTH VERSION (Instructions)||BLUETOOTH VERSION (Instructions)|
|1. Install the SpO2 Assistant program on your computer||1. Install the SpO2 Assistant program on your computer|
|2. Turn on the pulse oximeter||2. Turn on the pulse oximeter|
|3. Connect the device to the computer via the USB cable.||3. Make sure you set the "wireless" option on the menu to "on".|
|4. Follow the instructions according to the video below
(Non-Bluetooth)||4. Follow the instructions according to the video below (Bluetooth)|
|5. Analyze your results according to your needs. You can review
past results via File -> Open||5. If you cannot see wireless” being detected by the SpO2
assistant, then your laptop/PC does not have Bluetooth capability.|
|6. If so, please connect the CMS 50FW via the USB cable (as shown
on the left of this video)|
The finger should remain stationary while inside the probe. Not
suitable for continuous monitoring of SpO2 levels if the body is
not stationary. Does not work with Sleepyhead and is not compatible
with Mac. Mac must run Windows via bootcamp to use the provided
software. The face of the watch is 2.25 by 2.25 inches and might be
considered bulky for a petite user. The bluetooth does not connect
the device to your smartphone or tablet.
How do I delete data from the Device?
- Set Record to off on the pulse oximeter.
- Start another recording session. This will remove the original
Can you please send me a link to download the SpO2 Assistant
What types of reports can the SpO2 Assistant generate? Full Study
Strip Chart Report
Oximetry Report Can I connect the pulse oximeter to the PC via "Add
a bluetooth device"?
No. That will NOT work. You are supposed to connect the pulse
oximeter to the PC via the SpO2 Assistant program (see above video
May I have a soft copy of the SpO2 Assistant user manual and the
CMS 50F user manual?
Click here for the SpO2 Assistant User Manual
Click here for the User Manual
Click Here to Download the SpO2 Assistant Program
Click Here for a Soft Copy of the User Manual
Click Here for the Full SpO2 Assistant User Manual
Frequently Asked Questions
What does the finger attachment look like? Can data be loaded to
The probe is an adult silicon probe that fits your finger snugly
but not too tightly to impede blood flow. Data can certainly be
upload to the computer and analyzed. If you want, you can also
print out the result so that you can analyze it with somebody.
Will the software work with Windows 8?
Yes. The software will work with Windows 8 or any windows software
including the latest, windows 10. The unit, however, will not be
compatible with a MAC unless windows is already installed on the
MAC using Bootcamp.
Can I measure my SpO2 levels from my wrist?
Please note that CMS 50F comes with a SnugFit Probe. When you
connect the probe to the oximeter via the USB port at the side of
the device, yo