EPS 3D panel production line
Category: EPS 3D panel production linePublish Time: 2014-04-12
Advantage: 1.the whole 3d panel production line controlled by PLC
2.implement fault alarm and fast solve
EPS 3D Panel Machine :
1. Light in weight: its weight only 4kg/m2, and no more than 110kg/m2
ever after coated with cement on both side.
2.Large load-bearing capacity: a plate of 2.4m in height 1.22 in
width, 110mm in thickness with cement coating, can bear axially
over 77.4KN/m2, and horizontally over 1.95KN/m2.
3.Heat insulation and warmth-keeping: heat-resistance as high as
0.84m2.K/W, equaling that of a brick wall of 800mm thick.
4.Sound insulation:insulate as much as 45dB noise.
5.Enhancing the useful area:its thickness can be about 110mm with the cement coating ,which can
enhance the 10~13% of the useful area.
6. Easy to install and splice:as designed ,the plate can be spliced into any flat shape, folding shape
,folding shape and curving shape: and it is easy to lay apparatus
of electrical, water ,and gas inside the spliced structure ,its building efficiency can be as high as 24~28m2 per day per