4 x Receiver: S1PU-DC-ANT3
2 x Transmitter / Remote control: C-4
1 x User manual
Application: It can be used in industry automation, agriculture
automation and home automation, such as factory, house, farm,
pasture, vehicle, ship, offshore operation, aerial vehicle, field
call, etc. It can remote control equipments on land, water and air,
such as remote control lights, sirens, locks, motors, fans,
winches, blinds, linear actuators, doors, windows, electric
solenoid valves, security alarm, business signs and various
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof
connector, it can be installed outdoors.
Power Supply: Four working voltage versions, DC 6V, 9V, 12V, 24V.
Relay Output: This receiver is dry relay output, it can be used to
operate both DC and AC equipments. The output terminals are NO / NC
(normally open / normally closed), which serves as a switch. That
means you should also connect a separate power supply to
High Power: Each channel can work at maximum load current 30A.
With wired control terminals: You can connect sensors, limit
switches, manual switches or external devices to control the
With external telescopic antenna, the receiver have a farther
You can control the equipments by using the receiver with
transmitter (remote control) from any place within a reliable
Wireless RF signal can pass through walls, floors, doors or
With characteristics of reverse power protection and over current
Reliable control: The code has thousands of different combinations,
and the receiver only works with the transmitter which use the same
One/several transmitters can control one/several receivers
You can use two or more units in the same place.
A 4-button transmitter controls 4 single-channel receivers, and
each button controls a receiver.
Model No.: S1PU-DC06-ANT3 / S1PU-DC09-ANT3 / S1PU-DC12-ANT3 /
Power Supply (Operating Voltage): DC6V (S1PU-DC06), DC9V±1V
(S1PU-DC09), DC12V±1V (S1PU-DC12), DC24V±2V (S1PU-DC24)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Wire range for the terminals: 22-12 AWG
Working Frequency: 433.92MHz
Control Modes: Self-locking, Momentary, Interlocking
Maximum Load Current: 30A / each channel
Operating Temperature: -20C to +70C
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x 68mm x 50mm
The receiver can work with different transmitters.
You can use a receiver to work with a one or two buttons
transmitter, and each transmitter controls a receiver, such as
model C-2 / C-1 (100M), CWB-2 / CWB-1 (50M, waterproof), or CB-2 / CB-1 (1000M) etc.
You also can use four receivers to work with a four buttons
transmitter, and each button controls a receiver, such as model C-4 (100M), CWB-4 (50M, waterproof)