No Glow Wireless IR Flash Extender IR Booster With 128pcs LEDs
1,Sample order: Acceptable
2,LEDs: 128pcs,940nm Invisible IR Flash
3,1 Year Warranty
4,Work with Black IR Camera/ Work with Visible IR Camera/ Work with
Infrared IR Camera
This Flash Extender Wireless Black Flash IRX-22BW infrared flash
booster can enhance the quality of the night pictures and videos
from your invisible
black IR trail camera. An attached transmitter is used for
detecting the IR signal from night vision camera and trigger
unlimited units of flasher main units around 100 feet of it to
Two accessory parts are provided for shielding the visible light
from camera and get a way to detect a moment of capturing. After a
simply decoration processing, human will not see any visible IR Red
light and the invisible IR booster will be instead of the IR light
source on your camera to work at night. It will be compatible to
work fine with any other general IR game cameras.
1,Infrared Sensor Cable connects to ALL IR cameras,as Superscouter
Moultrie, Bushnell, Spypoint stealthcam
2,128PCS infrared power
3,Triggered by a wireless transmitter (included)
4,100ft wireless range
5,Compatible with most infrared cameras
6,Requires 4 alkaline D batteries or 12 volt external power source
7,easy to fixed via strap
1. Main Unit x1 set
2. Antenna x1 pc
3. Belt x1 pc
4. Instruction manual x1 pc
5. Transmitter x1 pc (Optional)
6. Shielding Sheet x2 pc (Optional)
7. Sensor Holder x1 pc (Optional)
- Secure Ordering
- Excellent Feedback
- Customer satisfaction rate: 99%
- Delivery Date Guaranteed
- Innovative R&D capacity
- Abundant OEM experience
- Small order are available
- 12 Months Warranty offered
Catch the action with a WELLTAR CAMERA!
We are looking for distributor to sell our IR Flash Booster and
Cameras. If you have any interest please click to send inquiry now.
Q: 1. What is your warranty policy?
A: We provides 1 year or 2 years warranty (To choose by our
Q: 2. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q: 3. What is the lead time?
A:Samples order need 1-3 days, mass production time needs 5-10
working days for order less than 500 pcs.
Q: 4. How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive.
Q: 5. How to proceed the order if I have to brand own logo?
A: Firstly, we will prepare artwork for visual confirmation, and
next we will produce a real sample for your second confirmation. if
mockup is ok, finally we will go to mass production.
Q: 6. Do you accept drop shipping?
A: Yes, it’s available.
1. There is no Light up from BAT-CHECK LED by pushing the Bat-Check
button when PW is either at ON or TEST mode, but it light at OFF
It is telling you that battery to be going down when a loading is
activated, those batteries might not be last for a long time. You
must be ready new battery for
2. I can see the Distant-Test Indicator does ON during pressing
BAT-LOW test either on main unit and the transmitter under TEST
mode, but I find
camera always take dark images or videos and the Self-Test Light
does not turn ON: It means a communication between transmitter and main booster is
fine. Check if the gooseneck sensor was already away from the IR
light source on camera. Most of cases are the IR sensor did not
snap properly or falling down from
camera to cause the IR sensor was shifted after you left.
Therefore, you have to find a way to make it snapping firmly.
Another reason might be the current
environment still bright that the camera does not need to switch ON
the internal IR lights
3. Seems not too much help even this booster is used: Investigate for a possible issue if a current angle of booster
might not the same as the camera lens. In
other case, you try to move the booster near to camera to make them
in the same target zone. You have to test in difference angle and
location for the best result.
Of course you need to prove the batteries are not poor before you
try to do further testing.
4. Seems not the same brightness for most of pictures and videos
comparing with internal visible RED Glow IR light: You have to check firstly if both
boosters and camera are toward for a same target zone. Then, you
may consider to add one or more black IR boosters to get greater
illumination if a zone is very
large and a target will be always far away
5. A scroll bar always appear in every night videos. Sometimes
scrolls fast sometimes slow: You need to refer the Advanced Usage Setting of this manual
to eliminate a scrolling bar after adjustment.
6. During setting up my scouting system, I could see the
Distant-Test Light to be ON while pressing the Bat-Low Check
button, but it did not response
while I press the BAT-CHECK key on transmitter: You need to check if the Main PW switch is at TEST mode firstly,
also, the transmitter and the booster must
be required with a same security code in order to work in the same