50L Drum extrusion blow moulding machine with single station
1, Electronic control system: Japanese Mitsubishi PLC computer plus
man-machine interface (Chinese or English) red paper, touch-screen
operation. All process settings, changes, search, monitoring, fault
diagnosis and other functions are achieved on the touch screen, no
contact with the working principle, components and durable.
2, Hydraulic system: proportional pressure control, equipped with
imported brand-name hydraulic components, stable and reliable.
3, Plasticizing system: efficient plasticizing mixing screw,
plastic plastic to ensure adequate and uniform.
4, Speed control system: frequency control + alloy steel gear
reducer, smooth speed, low noise, durable
5, Opening and closing mode, mobile system: beam arm, three
o’clock, the center of the mold clamping mode, to ensure long-term
use. Clamping force balance, no deformation, and the use of
translation mode body (ball linear guide), high precision, less
6, Blowing needle holder: the overall angle-type blowing needle
holder, stable and not shift, to ensure that products cut smooth.
This machine can help you to make the Max. Volume as 50Liter in the
jerrycan/drums. It’s widely used to make 20l~50L jerrycan. We will
makethe most suitable configuration according to your needs.
|Screw L/D ratio||(L/D)||25,28|
|Screw drive power||(KW)||37,45|
|Screw heating power||(KW)||7.3~9.1|
|NO.of heating zone||(ZONE)||4,6|
|Output of HDPE||(kg/h)||130~160|
|Hydraulic pump driving power||(KW)||22|
|Max.Size of Mold||(W×H)(MM)||700×950|
|Capacity of Accumulator head||(L)||6.6|
|Die heating power(Single-head)||(KW)||7.52|
|No.of heating zone(Single-head)||(ZONE)||5|
|Cooling water pressure||(Mpa)||0.3|
|Size of machine||(L×W×H)(m)||5×2.4×3.8|
|Weight of machine||(TON)||14|
Over the past 20 years, LVHUAN has always been the benevolent
choice of bottle making equipment for plastic containers packaging.
We have been making continuous efforts, from obscurity to
familiarity; from single product injection blowing equipment to the
whole series of injection blowing machines,injection stretch blow
moulding machine, extrusion blow moulding machine etc.,we are
working tirelessly for high-quality container packaging. Hope that
on the way to the future, you can witness our efforts and walk hand