High Efficiency Hydroelectric Turbine/Turgo Water Turbine/500KW 1mw
Inclined jet turbine;A Turgo impulseturbine turbine.It is mainly
composed of nozzle and wheel.The runner consists of an outer wheel
ring, an inner wheel hub and a number of single bowl-shaped blades
fixed by the wheel.The nozzle jet flows out from the back at an
Angle of 22.5° after diagonally punching the blade on the front of
the runner.Simple structure, low cost, but low efficiency.Only for
small power stations.The applicable water head is 20~100 m.
The main components of the oblique impact turbine are similar to
the bucket type, there are also nozzles and working wheels with the
bucket, the different places have the following points:
1. The placement position of the nozzle is not in the same plane as
that of the working wheel, but is at an Angle with the plane. This
Angle is called oblique Angle.
2. The water bucket is in the shape of a spoon. The jet enters from
one side of the water bucket and flows out from the other side,
with axial force.
3. The water hopper has an outer wheel ring, which increases the
blade strength and reduces part of the wind resistance loss.
Oblique impact turbine has a unique application range, in the
specific speed line n=30~70 range, the mixed-flow turbine is not
applicable, the single nozzle bucket turbine can not reach the
specific speed, and the double-click turbine efficiency is too low.
3. Product Paramenters
|100KW to 70MW|
|400V, 800V, 6300V, 10500V|
|Horizontal or Vertical|
|Stainless Steel ZG0Cr13Ni4Mo|
|Brushless or Static excitation system|
|Deyang Dongsen Hydropower Equipment Co., Ltd.|
1.You are a trading company or a manufacture?
We are a hydro turbine generator manufacturer supplied equipment
for more than 500HPPs. The engineers have over 30 years'
experiences. Our factory is in Deyang city, Sichuan, you will take
2 hours driving after you reach Shuangliu Airport, pay a visit to
our factory you will know more about us and discuss the details.
2.What Kind of hydropower micro should I choose?
We need to know water head, flow rate, voltage level, frequency,
on-grid or off-grid running, automation level from you to work out
3: Can you do the EPC for the hydro power plant?
Yes, We can design, producing and install the equipment, we will
dispatch technologist and workers to install the equipment.
4: What the packing of the equipment?
We will use wooden box or plastic film to protect the products.