Sign In | Join Free | My hfcletter.com
hfcletter.com
Products
Search by Category
Wholesale Marketplace
Home > Bearings >

220V IEC60730-1 Figure 8 Label Marking Abrasion Test Machine

Categories IEC Test Equipment
Brand Name: HongCe
Model Number: IN-2
Certification: calibration certificate (cost additional)
Place of Origin: China
MOQ: 1 set
Price: Negotiatable
Payment Terms: T/T
Supply Ability: 10 set /month
Delivery Time: 20 days
Packaging Details: plywood
Standard: IEC60730-1 figure 8
Power supply: 220VAC 50Hz
Test rate: 48rpm
Test stroke: 20mm
Friction wheel: Φ65*7.5mm
Brass washer: Φ60*2.5mm
Test times: 1~999999
Sliding weight: 500g. Strip weight 250g, with weight 750g
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    220V IEC60730-1 Figure 8 Label Marking Abrasion Test Machine

    IEC60730-1 Figure 8 IEC Test Equipment Label Marking Abrasion Test Machine 220V


    Standard description:

    IEC60730-1 Annex A :

    A.2 Compliance with the requirements for indelibility of markings classified according to A.1.2 is checked by the following tests:
    A.2.1 The markings under consideration shall withstand drops of detergent standing on the marked surface for a period of 4 h. At the end of this period, the detergent "scab(s)" shall be removed by a very fine spray of warm water (40 ± 5) °C or by lightly wiping with a damp cloth.
    A.2.2 The sample shall then be allowed to dry completely in an ambient room temperature of (25 ± 5) °C.
    A.2.3 The sample shall then be rubbed in the apparatus of Figure 8, using dry lint and a weight of 250 g measured as indicated.
    A.2.4 The sample shall then be rubbed using water-soaked lint and a weight of 250 g.
    A.2.5 If the shape or position of marking is such that it cannot be bleached or rubbed with this apparatus (for example, by recessing the marked surface) then the tests of A.2.3 and A.2.4 are not applied.
    A.2.6 At the conclusion of these tests, the marking shall still be legible.
    A.3 Compliance with the requirements for indelibility of markings classified according to A.1.3 is checked by the following tests:
    A.3.1 The marking under consideration shall be rubbed in the apparatus of Figure 8 using a dry lint and a weight of 750 g.
    A.3.2 The marking shall then be rubbed in the apparatus using a water-soaked lint and a weight of 750 g.
    A.3.3 The marking under consideration shall then withstand drops of detergent standing on the marked surface for a period of 4 h. At the end of this period, the detergent "scab(s)" shall be removed by a very fine spray of warm water (40 ± 5) °C or by lightly wiping with a damp cloth.
    A.3.4 After being allowed to dry it shall be rubbed in the apparatus using a detergent soaked lint and a weight of 750 g.
    A.3.5 After surplus detergent has been shaken off it shall be rubbed in the apparatus, using a petroleum spirit soaked lint and a weight of 750 g.
    A.3.6 For the tests of A.3.1 to A.3.5 the thickness of the buffing disc may be progressively reduced from 7,5 mm in order that the marking may be reached and rubbed. However, the minimum thickness of the buffing disc shall be not less than 2,5 mm. If the thickness of the buffing disc is reduced the weight of 750 g shall be reduced in linear proportion.
    A.3.7 At the conclusion of these tests, the marking shall still be legible.


    Production introduction:


    This testing apparatus is design and manufactured according to IEC60730-1 standard figure 8 and annex A requirements, used for testing the controller marking durability performance.

    The apparatus comply with the dimensions requirements of IEC 60730-1 Figure 8. Test times can be set from 1 to 999999 (default as 12 times), test rate 48 rpm. It is a easy operated professional equipment.


    Main technical parameters:


    EquipmentMarkings durability tester
    Test station1 station
    Test stroke20mm
    Test rate48rpm
    Test times1~999999, default as 12times
    Sliding weight500g. Strip weight 250g, with weight 750g
    Brass washerΦ60*2.5mm
    Friction wheelΦ65*7.5mm
    Power supply220VAC 50Hz
    StandardIEC 60730-1 Figure 8, Annex A



    China 220V IEC60730-1 Figure 8 Label Marking Abrasion Test Machine factory
    Send your message to this supplier
     
    *From:
    *To: Guangzhou HongCe Equipment Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2020 hfcletter.com. All rights reserved.