|Product name||Film Faced Plywood|
|Origin Place||Shandong Province ,China|
|Size||1220*2440mm 610*2440mm film faced plywood or as requested|
|Core||Poplar, birch, hardwood, combined or requested by client|
|Glue||MR, Melamine, WBP, Phenolic glue|
|F/B||Brown or black film or with logo|
|Thickness||Different thickness available, from 8mm to 18mm|
|Production capacity||3500Piece/ Day|
|Grade||A/A grade or requested|
Inner with plastic bag, outer side with 3mm plywood/carton,
then fasten with 3x6 iron sheet, then packed with pallets.
|Application||Concrete forming for construction|
|Payment terms||TT or L/C at sight|
|Min order||1*20ft container|
|Delivery time||15 days after receiving the deposit|
Note: the above data is only for your reference and this would not
offer you any guarantee because the actual repeat times of the
panels also is influenced by other factors such as different using
methods and storage etc.
2. Moisture (8-14% & density):
Transference to concrete is set up very easily. There is no need
for any transference preparation.
(1). Transference to concrete is set up very easily, so good for
construction work. (There is no need for any transference
(2). After installation of concrete, the surface looks like a
mirror. (the cement does not stick.)
(3). You are able to use film faced plywood until the plywood itself
is damaged. (Strong with nailing and knifing.)
(4). Environmentally friendly. (Even after incineration, there is
no hazardous substance.)
(5). It can be used for a long time, and for the initial price paid
for the material, you will feel its worth over time.
Always clean and repair the formwork panels before storage, the
formwork should then be stacked off the ground on level supports
and under cover. Framed formwork panels should be stacked alternately face and back
to back to avoid face damage by bolts etc. If panels are wet, do not allow them to dry too rapidly.
5.sealing of edges:
Phenolic film faced plywood edges are fully sealed by the factory
and it is the most important that all edges remain sealed. To obtain full value from a phenolic film faced plywood sheet any
recut edges should sealed as soon as possible with water proof
paint sealing of holes.
Any hole made in film faced formwork panels should also be sealed to
prevent water entering. If water does enter it may cause swelling around the holes.
6.cleaning and repair:
To obtain full life, cleaning should be carried out immediately
after each use. Phenolic film faced plywood may be wiped with release agent or
cleaned with water and stiffbrush. It may be necessary to use a hard wood scraper but care should be
taken not to damage the plywood face. Do no use a wire brush or sharp metal scraper to dislodge hardened
Why Choose HEYA Plywood ?
1.No wrapping, no fracture,not out of shape , it can stay 24hours
in boiling water.
2.Good performance and more turnover use time.
3.It is easy to take off the membrane;Time is only 1/7 of the steel
4.Make the surface of concrete more smooth and beautiful,so it can
be easy to make decoration and it also deduct the processing of
5.This can moderate and contact 30% time for a project.
6.Corrosion resistant and ir will nor pollute the surface of
7.It is good to keep performance warm,ia favorable to make
construction in winter.
8.Products can be made into warping plywood
9.It is better to nail,saw,drill than bamboo and steel mould, it
can be processed into different types.