40ka lightning arrester with 25A miniature circuit breaker
The product is designed according to the IEO and GB standards, and
applied to power system protection in the areas with high lightning
risk. It can prevent all kinds of surge currents directly hitting
lightning. It can be applied to single-phase and three-phase power
supply lines and modular design through different combinations.
Working principle of product
The function of surge protector is to limit the transient
overvoltage to the power line, the signal transmission line in the
voltage range that the equipment or system can bear, or to inflow
the powerful lightning discharge into the ground, and protect the
protected equipment or system from damage by the impact.
|Rated Operating Voitage||UC||320||320||320||320|
|Voltage protective level||Up(KV)≤||1||1.2||1.5||1.7|
|Max discharge current||Imax(8/20μS)||10||20||40||60|
Nominal discharge current
|Lndication of invalidation||Aging invalidation:green Normal,red:Invaldation|
|Sea level elevation≤3km|
Remote signal function
|Can also picking|
|Remarks||Other max continuous operating voltage can be customized|
1. leakage current is small, the response time is fast, and the
residual pressure is low
2. alarm indicating device, normal (green), red (fault).
3. can withstand high lightning shock
4. troubleshooting automatic reset
Notice of product
1. can withstand high lightning shock
2. troubleshooting automatic reset
3. it should match the working voltage of the protected equipment.
Please install according to the installation sketch.
4. lightning protection device IN as input and OUT as output, the
input end is connected with the outside, and the output end of the
input end of the connecting device is protected.
Product packaging:Carton packing
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport