Three Phase SCB10 Outdoor Transformer High Security And Reliability
· Model NO.: SCB10
· Phase: Three
· Cooling Method: Oil-immersed Type Transformer
· Certification: ISO9001-2000, ISO9001, CCC
· Frequency Characteristics: 50Hz
· Transport Package: Wooden Package
· Application: Power, Electronic, Lighting, Rectifier, Audio
· Core: Core-type Transformer
· Winding Type: Two-winding Transformer
· Usage: Rectifier Transformer, Combined Transformer, Power
Transformer, Distribution Transformer
· Shape of Core: Ring
Application: for power distribution system and large industrial
Standards: IEC 60076-11
Parameters: Rated Voltage: 6KV 6.3KV 10KV 10.5KV 11KV
Rated Capacity: 30-3150kVA.
Features: 1.High security and reliability in operation.
2.Economic and efficient to reduce network loss and working cost.
3.Low temperature rise.
5.Operation in moist place with high moisture-proof capability.
6.Customized transformers are available on your requirement
>>Installation height: altitude shall not exceed 1000m
>>Ambient temperature: -40ºC~40ºC
Dimension & Schematic Technical parameters
- Model No: SCB11 outdoor transformer
2. Phase: 3phases
|Dry type transformer Technical parameter table|
|nominal capacity||Voltage combination||Join group label||No-load loss(W)||load loss(W)||No-load current(%)||Short circuit impedance(%)|
|HV(KV)||High voltage range||LV(KV)|
Our transformers sell well all over the world. We have won a good
reputation among customers at home and abroad. We will do our best
to provide more high-quality products and services for you in the
Application Of Products
Our SC(B) series epoxy resin cast dry transformer is cast under
vacuum with thin insulating bands automatically . The core is made
of high-permeable grain-orientated silicon sheet and cast with
imported epoxy resin. Thanks to advanced technology, quality raw
materials , scientific management, and perfect inspection means
,our products have the following features:
The coil is reinforced with glass fiber and cast under vacuum with
filler epoxy resin. It has good mechanical properties, is free of
crack and inner bubble and has low local discharge, high
reliability, and long service life.
The high-and low-voltage systems are cast under vacuum, thus the
coil will not absorb moisture; the clamps of core are subjected to
corrosion-resistant treatment and it may run under high temperature
or other serious environments.
Flame redundancy , explosion-proof and no environmental
contamination. The insulating materials in the coil such as glass
fiber are self-extinguishing and they will not cause fire by the
arc resulted from short-circuit . The resin will not generate toxic
or harmful gas under high temperature.
Gas duct is embedded inside it to enhance the radiation power and
Low loss and low noise. The core is lapped with 45 full-miter and
the step-type lamination effectively improves distribution of
magnetic flux at core corners, and greatly reduces the no-load loss
and the nose level.
It highly withstands short-circuit and lightning impact.
Small in volume, light in weight, safe in running and free of
As per users' requirements the transformer may be provided with
casing and blower fan.