HG28 climbing Concrete Placing Boom, 28m, 3 sections boom, without
Widely for horizontal concrete placing at roof of highrise
buildings, by using which the overall working efficiency of the
project can be promoted.
Support internal climbing through floors and shafts on site with
1, The machine is fully hydraulic driven and can be slewed 360°.
2, The balance valve and solenoid directional valve are products of
3, The main electric components are from Omron or Schneider.
4, The modes of operation: Wireless remote control and cable remote
|Delivery pipe dimension (outside diameter × thickness) (mm × mm)||Φ133×4|
|Delivery hose dimension (inside diameter × length) (″×mm)||5″×3000|
|Radius of placing boom (m)||27.7|
|Stationary height (to the joint between the end of the boom and
Swivel table) (m)||22.9|
|Hydraulic foldable arm sections||1st section||10.5m|
|Boom articulation (°)||1st section||－4.2～82.5|
|Slewing range (°)||360|
|Power of motor (kW)||11|
|Pressure of hydraulic system (MPa)||28|
|Type of hydraulic oil||ESSO NUTO H46|
|Interval of climbing frame (m)||Climbing||3.0～4.2|
|Mode of operation||1. cable remote control|
|2. radio remote control|
|wind speed||Placing concrete||≤60 km/h|