5BBL Customize Stainless Steel Hot Liquor Tank With Liquor Gauge
Thermometer Ball valve Movable Wheels
Brewhouse are custom-built to fit each brewer’s individual needs.
Our staff works with you on everything from defining your optimal
brewery layout, to designing the setup and size of your brewhouse
and beer equipment hot liquor tank. Custom-piping? No Problem. Low
ceiling or cramped quarters, there’s a design solution for that.
Most importantly, every brewhouse is built with 304 Stainless Steel
and uses ABB motors, so they are as durable and hard-working as you
are. Further, every 20hl brewhouse goes through a comprehensive
quality control inspection before it leaves our factory, where
everything, including the inside of the piping, is inspected.
side or top manway
sight tube with calibration strip
CIP sprayball and downtube
outlet w/ stainless steel butterfly valve
water inlet fitting
over-flow tube routed under tank
dimple plate glycol cooling jacket
thermowell with strain relief
coned top and bottom
stainless steel legs w/ height adjusters & pads
clad in stainless steel;
Inner container: SUS304,Thickness 3mm, 2B finished.
Outer container: SUS304, thickness 2mm, Grind arenaceous.
Shell jacket: SUS304, thickness 1.5mm.
Insulation Material: polyurethane, thickness: 80mm.
Ribbon polished for the welded place.
Conical top/ Cylinder/ conical bottom/ shell jacket(one or two
sections) / bottom jacket / insulation both on shell and bottom /
with adjustable legs.
Connections:level interface/ steam Import and Export/ Pt100
interface/ top manhole / respirator/ Inlet/ Outlet.
We can supply different size of beer brewery equipments,Such as 50l/batch, 100L/batch, 200L/batch, 500L/batch, 1000l
/batch, 2000L/batch, 3000L/batch, 5000L/batch; 1-2bbl, 3bbl, 5bbl,
7bbl, 10bbl, 15bbl, 20bbl, etc;
1. Be made of stainless steel 304. Brushed outer shell.
2. Working volume: 5BBL,
4. Thickness of insulating layer: 100mm, Thickness of inner body
stainless steel: 3mm, outer shell is 2mm
5. Steam jacket
6. With liquid level meter
7. Rake plow/ Grain out door, Milled sieve plate; Grain washing
round pipe; CIP rotary spray device
8. Top mounted manway with full glass, manway handles material is
plastic; Top decorative funnel; light fixture with LED; thermo
9. Bimetal thermometer and temperature probe;
10. Bottom wort collect
11. Outer and Inner plate protection , and ribbon polished on all
12. All valves are stainless steel, which attaches with tri-clamps;
NPT connect ports etc
13. With all matched valves and accessories.
|Fermentation time||8-12 days||8-12 days||8-12 days||8-12 days||8-12 days|
1. Motors and pumps equipped in brewhouse and pipeline, their brand
are 20hl brewery equipment hot liquor tank famous brand.
2. Round stainless steel manhole with sight glass, it is equpped in
the top of brewhouse.
3. False plate is made on a complete stainless steel by CNC lathe,
it is strong, filter fast and leak no any grist., and used in
4. First class sanitary sight glass, equipped in the pipeline of
5. plate heat exchanger, Suspension type, easy to disassembled and
6. Pressure relief value with glass, clean and sanitation, It will
have some pressure changes with the time went by, and it is easy to
observe the wort status.
7. Rotating racking arm, used in fermentation tnak, and port on the
cone with butterfly value, and it can get the beer from different
place in the fermentation tanks.