ISO CE certificate easy installation EPS lightweight sandwich wall
EPS Lightweight Sandwich Wall Panel Machine fully automatic
assembly line production high output,high efficiency
world popular wall board/interior partition board
EPS Lightweight Sandwich Wall Panel Machine calcium silicate board
The production line adopts the newest technology, the manufacturer
can have a high profit with a low investment. The whole line is
made up of 8 main parts: foaming system, storage system, automatic
conveying system, automatic measuring system, mixing system,
pumping and pouring system, panel forming system and operating
system.The material feeding, measuring and mixing are all
automatic. The labors only need to press the button to control the
Calcium silicate board/fiber cement board (face panel) ,cement, fly
ash, eps, sand, additives (core)
1. light weight
2. fire proof
3. water proof and damp proof
4. sound insulation
5. heat insulation
6. easy installation
Q1: What's the capacity of the production line?
A1: The capacity depends on the quantity of the panel moulding
machine and your panel thickness. If the panel thickness you want
to make is 100mm, then one panel moulding machine can make 40
pieces of panels. If the panel thickness is 150mm, then one panel
moulding machine can make 30 pieces of panels.
Q2: Can I make 3000mm-long panels?
A2: If you make wall panels with face panel (calcium silicate board
or fiber cement board), the normal panel size is 2440mmx610mm
because the face panel size is like this. However, if you don't use
face panel, the panel size can be 3000mm long.
Q3: Can I make 1220mm-wide panels?
A3: Yes, you can, but the panel is difficult to install on the
construction site and the accuracy of panel size is not as good as
Q4: How long is the curing time?
A4: It is around 5-6 hours in normal temperature.