The XL-801R three-phase AC DC Calibrator is a new generation of
high-precision standard power source based on 1.2 G MAC DSP,
large-scale FPGA, high-speed and high-precision DA and
high-fidelity power amplifier. Applicable to electric power system,
electric power, remote control, dispatching and other power
departments and enterprises that need measurement, inspection and
high-precision standard signal sources. It is also suitable for
other occasions where high-precision standard signal sources are
required for measurement and inspection.
XL-801R can output high-precision voltage and current with
adjustable frequency, phase and amplitude at power frequency
(40Hz~65Hz). It is a highly accurate adjustable voltage and current
standard source. The XL-801R can output very pure sinusoidal
voltage current with a distortion of no more than 0.2%, typically
0.05%. The XL-801R's voltage-to-current output has a very high
output stability, typically 0.01% RD. Therefore, it is very
suitable for work situations requiring high-precision inspection
and calibration, such as the measurement department for the
detection of various voltage, current, power and other electrical
|Name:||Ac Dc Calibrator||Phrase:||3 Phrase|
|Accuracy:||Better Than ±0.02% RG||Stability:||Better Than ±0.005% RG/1min|
|Distortion:||Better Than 0.05% (non-capacitive Load)||Output Power:||15VA Per Phase|
|Full Load Regulation:||Less Than ±0.01% RG||Display:||320*240 LCD Display|
2. Main features
1) It is possible to output a pure sinusoidal power signal with a
distortion of 0.05% (typical).
2) Each harmonic output can be superimposed on the fundamental
3) The frequency output can be adjusted from 40Hz to 65Hz, the
resolution is 0.004Hz, and the accuracy is 0.01Hz.
4) The AB phase is a frequency reference, and the C phase is a
separate frequency reference, so it can be phase-separated.
5) The phase 0~360 degrees can be adjusted arbitrarily, which can
easily simulate various power supply situations and even reverse
6) Strong load capacity, can carry capacitive, inductive, resistive
load or composite type load, and the load regulation rate is better
than 0.03% RG.
7) Excellent temperature stability, the core device is a military
grade product with a temperature coefficient as small as 1PPM,
which can guarantee the output precision in the outdoor temperature
8) It is powerful and flexible with 32-bit MCU+DSP processor.
9) The waveform of the power frequency is up to 50,000 points per
week, and the internal signal output does not need a filter for
smooth filtering, which ensures the accurate output of the
waveform, so that the system can output accurate harmonics, and the
system has excellent harmonic distortion. index.
10) It can be easily connected to the PC through an RS232 to expand
11) Perfect overcurrent, overvoltage, overheat, short circuit, open
circuit, overload protection.
12) Hardware PID, the response is extremely fast, and the change of
load will not cause the fluctuation of the output.
3. Main functions
v AC standard source output: It can output three-phase power
frequency (40Hz～65Hz) frequency, phase and amplitude adjustable
high-precision voltage and current, which is convenient for power
workers to develop and verify.
v Transmitter verification: for voltage, current, power
vCommunication function: It is used to communicate with PC and
other main control modules. The communication protocol is
“Programmed Power Interface Protocol”.
v Power check function: It can be used to check the energy pulse
v Split phase frequency output: The A and B phase frequencies of
the device are uniformly adjustable, and the C phase frequency can
be independently adjusted, which is convenient for users who need
two frequencies, such as the synchronous device in power
v User-defined functions: Users can customize various function
outputs, but require functions that do not contain DC components.
vSecondary development: Users can develop various functions they
need through the communication port according to the Program
Control Power Interface Protocol.
vSoftware control function: equipped with XL1000 series operation
software, as long as the device power is turned on and the
communication line is connected, it can be controlled freely on the
PC, which is convenient and quick.
vLocal function: With 320*240 LCD display and 40 buttons for local