1 Phase Current And Voltage Calibrator , Power Meter Test Equipment 0-1000V DC

XL9210 single-phase AC and DC voltage standard source (hereinafter referred to as source) can generate DC, square wave, triangle wave, sine wave, and 129 harmonic superposition, fundamental wave superimposed low frequency oscillation, custom waveform output and other functions. Can be used in applications requiring complex power waveform signal output, such as transformer detection, harmonic analysis, etc.
1. Software introduction
The operation interface of the XL203 transient source control software uses a graphical interface, which is easy to operate and beautiful. Through the software, the user can conveniently control the source to output any desired power waveform signal, such as
1) DC output;
2) with pulsating DC;
3) square wave output;
4) triangular wave output;
5) Power frequency signal output;
6) Power frequency superposition up to 129 harmonic output;
7) 0.001~5KHz voltage output;
8) Superimposing the AC signal output of low frequency oscillation (such as superimposing low frequency signal as low as 0.4Hz on 50Hz), and the oscillation amplitude can be set;
9) superimposing the AC output of the DC component;
10) manually draw the waveform output;
11) waveform output containing DC attenuation component;
12) Support single-cycle waveform output and repeat output.

The powerful waveform editing and output capabilities of the software allow the device to output virtually any desired signal waveform. The software provides a waveform display interface, WYSIWYG.
The software supports saving the edited waveform to the hard disk, which can be easily called up the next time you need it.

2. Main features
1) XL9210 single-phase AC and DC voltage standard source is a new generation of high-precision standard power source based on high-speed DSP, large-scale FPGA, high-speed and high-precision DA collector and high-performance power amplifier. Applicable to power quality monitoring, transformer testing, harmonic analysis and other occasions requiring high-precision variable frequency power signals and harmonic output;
2) XL9210 has powerful DC output performance, its output DC peak can reach 1000V DC, stability and accuracy can reach less than five ten thousandths;
3) XL9210 has powerful harmonic output performance, can output harmonics with power frequency up to 129 times, and can simulate various interference signals received by the power grid in practical applications;
4) XL9210 also provides a rich and powerful waveform editing function, the user can realize the output of the hand-drawn waveform through the control software;
XL9210 is suitable for output applications that require complex waveform signals and can load a certain amount of power.

3. Technical indicators
No. Name Indicator range Remarks
1 phase 1 phase voltage
2 DC output range 0-1000V can be customized
3 AC output range 0-720V Customizable
4 AC frequency range 0.001-5KHz
5 harmonic output range 2-129 times
6 voltage output accuracy 0.05%
7 harmonic output accuracy 0.1%
8 stability better than 0.01%
9 maximum power 300W
10 Continuous output capability I<=0.2A U<=720V AC Output current does not exceed 0.2A
I<=0.3A U<=1000V DC output current does not exceed 0.3A
11 port voltage maximum 1000VDC
12 DC voltage position 63V, 252V, 504V, 752V, 1008V
13 AC voltage output gear 45V, 180V, 360V, 540V, 720V
14 years stability 60ppm/year

Shenzhen Xinglong Technology Co., Ltd. was established in 2004, is located in the Nanshan District, Shenzhen high tech Industrial Park, is a professional engaged in the Smart Substation detection equipment R & D, production and sales of national key high-tech enterprise (certificate number: GF201244200546). Attention to intelligence (in the field of digital substation testing technology research, from the beginning of 2009 will be gradually introduced various types of testing equipment, including electronic transformer calibrator, digital electric energy meter calibrator (check), with unit testing instrument, and wisdom to substation field testing and acceptance of the project provides the means and tools. Companies actively involved in the development of a number of national standards, to help power companies to solve some of the problems in the field of intelligent substation testing industry technology.

- SYN is a technology started the company, our unremitting pursuit of technology embodied in products of excellent performance, company's substation intelligent test series products has 26 provinces in the country get successful application, and successfully applied to the "China Electric Power Research Institute (EPRI)", "Chinese Academy", "national high voltage metering station" national level institutions.

The company established a complete quality control system and after-sales service system, as of the end of 2014 the company engineering staff has been involved in the testing of more than 100 National Smart substations, for users to solve a lot of technical problems.

Company has won 7 provincial and ministerial science and technology award, the product has laid a good reputation in the industry.

2014 August Xinglong technology successfully in the shares of small and medium-sized enterprises transfer system (the new board) listing (Stock Code: 830924 and become a public company.

Syn can not develop without the support from all sectors of society, we warmly welcome domestic and foreign customers, agents, investors and our sincere cooperation, common development. The future of the company will be with the national system for the transfer of shares in the capital market platform, efforts to technology upgrades and new product research and development, with three to five years to intelligent substation test products to cover all aspects of the smart substation. Strive to become a benchmark for the field of intelligent substation testing business, for the construction and development of China's smart grid to contribute their own diligence and wisdom.