Transparent Fast Drying Silicone Sealant Glazing 260ml One Componet
Base : acetic acid Silicone, Size: 300ml / 260ml / 250ml, Container
Type: Tube , Color: Generally colours is porcelain white , black,
silver grey , transparent and semi- transparency , Density
0.56(g/cm3) , Performance Temperature: Range: lower 6℃ or higher
than 40℃ , Substrates: aluminum alloy, plastic door , all kinds of
glass , pottery , porcelain engineering adhesive sealing. Full
Cure: 24 hours. Application Time: 30 minutes. Application
Temperature Range: Neutral room temperature , Characteristics :
Will not shrink or crack , Weatherproof Resistant , 30 minutes Tack
free time, For Use with : Standard Caulk Gun , Application : For
The point fixed and fully transparent glass curtain wall assembly ,
Windows , Doors, Siding , Trim , Molding , Baseboards , Vents ,
Structure and other Attic / Basement Applications and multi-purpose
, Storage : 9 months shelf life if stored below 27℃ in cool and dry
place after production.
1, The large glass plate assembly. Glass skylight joints sealing.
2, The point fixed and fully transparent glass curtain wall
3, The glass joints sealing.
Main Technology Data:
Tensile Modulus Mpa
Tensile recovery rate
20 - 60
9 months shelf life if stored
in cool and dry place after
Restriction of Usage:
1, Unsuitable used on the material's surface that leaking grease,
plasticizer or solvent.
2, It should be used in the ventilated places, because the silicone
sealant need to absorb the moisture
in the air for drying.
3, Unsuitable used for frost or wet surface.
4, Unsuitable used for metal coated glass assembly
5, Unsuitable used for marble, granite and other alkaline
substances joints sealing.
6, Unsuitable for construction on the material's surface that the
temperature lower 6℃ or higher than 40℃.
1, We would provides complete product technical information,
technical advice and free compatibility test.
2, We would answer the user questions in using process promptly.
The interface design and construction method:
Please refer to.
1, It will release of volatile chemical compounds of silicone
sealants in drying process and may be harmful
to health if long-term inhalation, should maintain good ventilation
2, It will not release any harmful substances after dry, will not
3, Children do not contact the uncured silicone sealant, rinse with
water and seek medical treatment if
contact with eyes;
Quality guarantee (QA)
We will issue one AQ of our products after we know the construction
place and project specific
content from our buyer;
It is no need to repair generally. Remove and cleaning the
substrate surface if the seal joint is
damaged, and fill it with new silicone sealant. TIANYU brand
silicone sealant can be very good adhere with the dried silicone
Estimated amount of use: Please see following form of estimated
amount of various joints:
The actual usage amount maybe different due to the joint design,
installation position of pad material, repairing skill and wastage
Information published in this instruction is correct. However, but
no means can it be considered
and absolute guarantee, as usage and application of the product in
accordance with the instruction given
and success in application is beyond our control and is depend on
many factors. Customers should have
a good knowledge of product and make independent judgments of
optimal usage before application.
Joint show :