Exterior Wall Polyurethane Insulation Sandwich Panel-Polyurethane dry cladding panel series
Width of Panel:450mm or 600mm .
Thickness of Panel:25mm or 40mm .
Length of Panel: Any length .
Surface Material(upper layer):Color aluminum alloy sheet with thickness 0.5mm or 0.6mm .
Fluorocarbon coatings for special aluminum alloy sheet is with
Surface Color :Monochromatic (single-style deployment of color) or color (a
variety of imitation stone etc.). (To be customized according to
Surface Pattern :Plane(no bump or concave-convex) or three-dimensional pattern(bump
or concave-convex). It is suggested to be treated with different embossing to enhance
the impact strength. There are two embossing: big or small.
Core Material(middle layer): Polyurethane Rigid Foam
Bottom Material(lower layer):Aluminum foil with 0.05mm thickness
weight,strong and long life
2)Use of automatic continuous production line,made by strict
quality control,high industrialization
3)Simple installation,high construction efficiency
4)Aluminum outer layer,polyurethane inner core,aluminum foil
bottom,relatively stationary air layer,forming a multi-fold
insualtion layer,excellent thermal insulation effect.
5)The outer can be choosed with different
embossing,texture,colorful,effects such as stone,natural and
embraced seamless with the architectural style.
6)Widely used for both old houses and new steel structure villa.
7)Used with environmental-friendly foam,environment protection
8)High industrializtion to avoid wrangling